annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

3 way vertical toggle switch

can we have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom
0 Compliments
Message 1 sur 40
11 097 Visites
use a slider control, but set the type to integer instead of double and coerce the range from 1 to 3. The slider will then take on one of three values.
0 Compliments
Message 2 sur 40
11 083 Visites
If you want something that looks a bit more like the standard switches, I've made some that use the picture control.

If you're interested, you can read a bit more and download them here.

Ed


Ed Dickens - Certified LabVIEW Architect
Lockheed Martin Space
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Message 3 sur 40
11 074 Visites
I need to substitute a two ways switch in a four ways switch. Do you know if this is possible? Thank you.
0 Compliments
Message 4 sur 40
11 017 Visites
Hi Aurelia,

You can modify the example given in this document:
How to Create a Three-Position Vertical Switch

to have a 4 way switch. The example gives step-by-step instructions to do that when you click on the Help button (however, note that this example is written for LabVIEW 5.0.1 so some menu options in later versions of LabVIEW are slightly different).

Hope this helps and let me know if you have any questions about it.

Good luck!
Shakhina P.
Applications Engineer
National Instruments
0 Compliments
Message 5 sur 40
10 975 Visites
hello sir,

thanks for giving your valuable suggestions but sir what i want is is to have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom. MOST IMPORTANT the shape of the switch should be same as that of vertical toggle switch.
0 Compliments
Message 6 sur 40
10 946 Visites
hello sir,

thanks for giving your valuable suggestions but sir what i want is is to have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom. MOST IMPORTANT the shape of the switch should be same as that of vertical toggle switch.
0 Compliments
Message 7 sur 40
10 946 Visites
Hi Ed,

Thanks for the link to your page. In all of my google Labview searches, I hadn't come across your page yet. I think we need a forum section where people can put links to their Labview homepages.
0 Compliments
Message 8 sur 40
10 938 Visites
Avon: Try the attached vi. It has a 3 way switch control.
- tbob

Inventor of the WORM Global
Message 9 sur 40
10 912 Visites
thanks a lot buddy.... i think this will solve my problem... thanks once again..
0 Compliments
Message 10 sur 40
10 883 Visites