Labview-Ethernet (TCP/IP)-Arduino

[ahmalk71]

Dear all!

I'm trying to develop an application in which I want to control an Arduino Uno using Labview and tcp/ip communication. I have the arduio ethernet shield as well. So I want to start by blinking a led, but I can't find any example on the web. Could you please help me with this.

Best regards

Ahmalk  

[Nathan_B.]

Here is one user that got it working over ethernet.  IIRC, it basically requires overwriting your entire LIFA.

[ahmalk71]

I'v allready checked that and wasn't able to get it work. Uploding the firmware into the Arduino gives a load of compiling errors. 

[Chrisatkazoo]

How about a wireless USB Sharing Station as a workaround?

http://christophhartel.com/labview-arduino-communication-via-wireless-network/

[ahmalk71]

Wireless is out of question, ethernet interface is the only choice I have. I'v given up the ide of using TCP and started with UDP instead.

[Nathan_B.]

I would not recommend using UDP.  Packet loss is common with UDP and will certainly adversely affect the ability of you to send and receive unique packets.

[John772]

Hello, were you ever able to establish a connection to your Arduino using ethernet? I am attempting to do the same but am struggling