LabVIEW-Control Valve

[aryans]

I have started a new project where I have to control the valves operation through Labview 2015,using NI USB  cDAQ).

I need to control Flow control valve(open, semi open, partially open, semi close, partially close, fully close) using Labview. It is a globe valve and 4 numbers are used here.

Please let me know, how should l develop the VI for this? How to get started?, any helpful links? If there is any example code?

Its little urgent !

[AshishUttarwar]

Can you elaborate on the type of valve interface?

[aryans]

Hi Ashish.. I am using electrically actuated valve, it is globe type.

Interface it with labview by using NI USB Cdaq.

On Fri, Apr 22, 2016 at 2:53 PM, AshishUttarwar <web.community@ni.com

[AshishUttarwar]

Ok. This discussion will help answer some of your questions:

http://forums.ni.com/t5/LabVIEW/Controlling-a-Solenoid-Valve-using-NI-USB-6008/m-p/3260223

[aryans]

Hi.. I am implemeted he on/off solenoid valve in labview using daq assistant.. Now I need to implement electrically actuated CV using daq assistant for diff conditions such that fully open, partially open, fully closed etc.. $4 valves are used here. and they are globe type valves. I didn't get the logic for that. plzzz help me..