Reading GPS data from Arduino

[CHOPS_avn]

Hello,

I am currently trying to read GPS data from an Arduino UNO through LabVIEW Communications. Is there anything similar to an NI-VISA driver for LabVIEW Communications vs. regular LabVIEW?

If not, any way to communicate between the USB ports and LabView Communications would be swell.

Thanks.

[sherlockholm]

Is there any reason you want to use LabVIEW Comms instead of just LabVIEW?

With LabVIEW there is a 3rd party tool that helps allow for communication between LabVIEW and Arduino:

Can I Control an Arduino from LabVIEW?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019SSZSA2&l=en-US

Hope this is helps!

[National_Burritos]

If you want to us Comms/LabVIEW NXG/have code in there already you don't want to re-write, you could try the LabVIEW NXG "VI Interop" node which allows you to call LabVIEW code in LabVIEW NXG: https://www.ni.com/docs/en-US/bundle/labview-nxg-nodes-api-ref/page/interoperability-nodes.html 

It might allow you to add a node that just talks to the Arduino using the LabVIEW library but I am not sure. 

LabVIEW NXG does allow you to send and receive VISA commands, but probably does not have a whole driver for the Arduino.