NI-VISA in Open Suse 12.1 and USB

[FuManWho]

Hi marjekbir1,

Do you have more than 4 gb of ram on your computer?

Also here is similar discussion.

[marjekbir1]

Hi Paolo,

Yes, this is a good discussion that you sent me.

I will try those recommandations next week. and i will advise you if i get some thing.

Thank you a lot for your help.

a.s

T&B

[marjekbir1]

Hi Paolo,

I read the full discusion about this error, and i did all step recommanded,

I added the memory of kernet parameter in /boot/grub/menu.lst: "memmap=60G$0x100000000" .

But i can't get a good result, every time a  i execute lsdaq for nidaq or Nivisaic for NIvisa i have the same error, so this error not related to the memory of kernel.

let me know if you have any addition.

Thank you a lot for your time.

[marjekbir1]

Hi Paolo,

Good morning, The NI-VISA can't works with USB on opensuse 12.1 to control the intrument N9000A or N1996A . Now , i ask you if this lib NI-visa can works with Ethernet Cable(RG45) to control the instrument N9000A(Agilent)?

if yes could you refere to me the steps that can help me to configure everything ?

Thank you.

a.s

T&B

[FuManWho]

Hi marjekbir1,

Yes you should be able to communicate to a device with Ethernet using NI-VISA. Here is the resource that states this.

Here is a resource that gives you steps to set it up.

We also have a driver for that device for LabVIEW and Labwindows/CVI.