From 11:00 PM CST Friday, Feb 14th - 6:30 PM CST Saturday, Feb 15th, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Hobbyist Toolkit

cancel
Showing results for 
Search instead for 
Did you mean: 

loss connection to target when deploy project to rpi 4

you're right. Messing up with files and install LabVIEW manually is not RECOMMENDED 🙄.

thanks for your help.

0 Kudos
Message 11 of 15
(2,345 Views)

Raspberry pi 4 lost ethernet connection after LINX target configuration uploaded Labview services. It happened after Rasberry pi 4 rebooted. LINX still has big issues.

0 Kudos
Message 12 of 15
(2,314 Views)

Hello,

 

I have the same issue, is there any fix for this already?

 

LabVIEW version: LabVIEW 2020 32-bit

Pi: Raspberry Pi 2B

NavinSubramani_0-1617572575791.png

NavinSubramani_1-1617572588168.png

 

Now, When I try to run the example for the first time, it gets connected, and deployment is successful. Once, the deployment is done, I get the connection lost error as below,

NavinSubramani_2-1617572663983.png

 

I click 'Ok', and VI stops. Now I rerun the VI. It says "Failed to connect to target"

NavinSubramani_3-1617572736238.png

But in the "Target Configuration" Window, the connection is still successful on clicking connect

NavinSubramani_4-1617572791472.png

 

I have to restart "pi". And connection becomes successful through an example. But on deployment, this repeats again.

 

Please help.

 

 

 

 

Navin Subramani | CLA, CTA | boring engineer
0 Kudos
Message 13 of 15
(2,227 Views)

Exact same problem and screens!! Is there any fix ?

0 Kudos
Message 14 of 15
(2,182 Views)

Hello,

 

I was having the same problem as what you are seeing.

What was causing my issue was the fact that I had 1-Wire enabled.

(Preferences > Raspberry Pi Configuration > Interfaces)

 

Try disabling this and see how you get on.

0 Kudos
Message 15 of 15
(1,917 Views)