Hobbyist Toolkit

cancel
Showing results for 
Search instead for 
Did you mean: 

loss connection to target when deploy project to rpi 4

you're right. Messing up with files and install LabVIEW manually is not RECOMMENDED 🙄.

thanks for your help.

0 Kudos
Message 11 of 15
(1,629 Views)

Raspberry pi 4 lost ethernet connection after LINX target configuration uploaded Labview services. It happened after Rasberry pi 4 rebooted. LINX still has big issues.

0 Kudos
Message 12 of 15
(1,598 Views)

Hello,

 

I have the same issue, is there any fix for this already?

 

LabVIEW version: LabVIEW 2020 32-bit

Pi: Raspberry Pi 2B

NavinSubramani_0-1617572575791.png

NavinSubramani_1-1617572588168.png

 

Now, When I try to run the example for the first time, it gets connected, and deployment is successful. Once, the deployment is done, I get the connection lost error as below,

NavinSubramani_2-1617572663983.png

 

I click 'Ok', and VI stops. Now I rerun the VI. It says "Failed to connect to target"

NavinSubramani_3-1617572736238.png

But in the "Target Configuration" Window, the connection is still successful on clicking connect

NavinSubramani_4-1617572791472.png

 

I have to restart "pi". And connection becomes successful through an example. But on deployment, this repeats again.

 

Please help.

 

 

 

 

Navin Subramani | CLA, CTA | boring engineer
0 Kudos
Message 13 of 15
(1,511 Views)

Exact same problem and screens!! Is there any fix ?

0 Kudos
Message 14 of 15
(1,466 Views)

Hello,

 

I was having the same problem as what you are seeing.

What was causing my issue was the fact that I had 1-Wire enabled.

(Preferences > Raspberry Pi Configuration > Interfaces)

 

Try disabling this and see how you get on.

0 Kudos
Message 15 of 15
(1,201 Views)