Hobbyist Toolkit

cancel
Showing results for 
Search instead for 
Did you mean: 

Raspberry Pi Display options??

Solved!
Go to solution

I added the 7 inch touchscreen display to my Raspberry Pi 4B w 8GB and a 32 GB storage card, has plenty of memory.

No I wish to display my Front Panel on the Pi in the VI settings I enabled the Front Panel view, and restarted many times.

Thoughts or suggestions?  

My goal is to make this a standalone VI running device.

 

Chad Peddy

0 Kudos
Message 1 of 4
(3,718 Views)
Solution
Accepted by Chad_Peddy

The embedded version of the LabVIEW runtime that is installed on a Raspberry Pi (and Beaglebone Black and most of NI's realtime targets with the exception of a few high end Intel x86 systems) does not support displaying the frontpanel on a local display. There is no magic ini file setting to enable this, as the functionality to display a front panel is simply not present. The only way such a target supports a front panel display is during debugging, with the front panel executing on your development machine and communicating with the VI on the target over the network.

Rolf Kalbermatter
My Blog
0 Kudos
Message 2 of 4
(3,671 Views)

I'm looking to do this with my current setup. Do you have a link to a tutorial or any steps to accomplish this? Thanks

0 Kudos
Message 3 of 4
(3,138 Views)

Well!

- What is your current setup?

- What do you want to do?

Rolf Kalbermatter
My Blog
0 Kudos
Message 4 of 4
(3,135 Views)