06-26-2020 10:37 PM
I added the 7 inch touchscreen display to my Raspberry Pi 4B w 8GB and a 32 GB storage card, has plenty of memory.
No I wish to display my Front Panel on the Pi in the VI settings I enabled the Front Panel view, and restarted many times.
Thoughts or suggestions?
My goal is to make this a standalone VI running device.
Solved! Go to Solution.
06-29-2020 02:07 AM - edited 06-29-2020 02:07 AM
The embedded version of the LabVIEW runtime that is installed on a Raspberry Pi (and Beaglebone Black and most of NI's realtime targets with the exception of a few high end Intel x86 systems) does not support displaying the frontpanel on a local display. There is no magic ini file setting to enable this, as the functionality to display a front panel is simply not present. The only way such a target supports a front panel display is during debugging, with the front panel executing on your development machine and communicating with the VI on the target over the network.
01-07-2021 02:46 AM
I'm looking to do this with my current setup. Do you have a link to a tutorial or any steps to accomplish this? Thanks
01-07-2021 02:53 AM