cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

My computer cannot find the driver for the PCI 6515. I installed the latest "traditional" NI DAQ (I only have 6.1 LabView version), but that did not help. Can anyone help?
 
Thanks!
0 Kudos
Message 1 of 5
(1,647 Views)

Re: PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

What do you mean your computer can't find the driver?
What are you trying to do do?

Does the card show up in MAX?
0 Kudos
Message 2 of 5
(1,643 Views)

Re: PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

The 6515 requires the newer DAQmx driver and DAQmx (http://www.ni.com/support/daq/versions_pci_pxi.htm) and DAQmx is not supported by LabVIEW 6.1.
0 Kudos
Message 3 of 5
(1,638 Views)

Re: PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

NYC,

When I installed the card, the computer detects its and starts looking for the drive. It fails to find one. MAX doesn't show the board.

I appreciate any suggestions you might have.

Thanks!

0 Kudos
Message 4 of 5
(1,633 Views)

Re: PCI-6515 driver missing, using the traditional NI DAQ and LabVIEW 6.1

Dennis,
 
thta's what I was afraid of.... Well, I hope NI will be willing to swap the 6515 fior the 6527.
 
Thanks!
0 Kudos
Message 5 of 5
(1,632 Views)