automatic change in all pages of the report

[Walter_Rick]

Hi Wasim90,

If I should analyze the problem, I also need the dataset.

Greetings

Walter

[Walter_Rick]

Therre is no TDX file.

[Wasim90]

Yes of course, you can only upload up to 10 MB, but the file has 17 MB! Is there any way to upload a larger file?

[Walter_Rick]

I assume it is not necessary to have the whole dataset. I think 2 or 3 layout pages plus the corresponding data are enough. Can you reduce the layout and dataset in this way?

[Wasim90]

I hope it works now

[Walter_Rick]

The problem was the XY-Relation, which was wrongly defined. I have attached a working example.

You find the XY-Relation function in ANALYSIS in the toolbar “Channel functions”

[Wasim90]

Hi Walter,

actually, the events come after the evaluation.
the events come so after the evaluation , here is the code for the evaluation . What should be changed in the code to get each event with a defined time.
I also sent an example of a file before evaluation, after evaluation we then get channels with low-pass filter, which are also done without event search.

Greeting

[Walter_Rick]

Which code?

[Wasim90]

Call Data.Root.ChannelGroups.Add("Ereignisse -Filter-a-5-3 Y", 4).Activate()

ChnEventList1 = ChnEventDetectionWindow("Zeit 1 - Standardmessrate", "Filter-a-5-3 Y", 0.5, 100, 0, 0)
ChnEventList1 = ChnEventFilter(ChnEventList1, "Peaks", 0.08, "Value")
ChnEventList2 = ChnEventDetectionWindow("Zeit 1 - Standardmessrate", "Filter-a-5-3 Y", -0.5, -100, 0, 0)
ChnEventList2 = ChnEventFilter(ChnEventList2, "Peaks", 0.08, "Value")
ChnEventResultList = ChnEventOperationOR(ChnEventList1, ChnEventList2)

ChnEventList1 = ChnEventResultList
Call ChnEventCreateXYChannels("Zeit 1 - Standardmessrate", "Filter-a-5-3 Y", ChnEventList1)

[Wasim90]

thank you very much, it worked.
but I had to write code for each event in each channel. and at 15 channels and only limited that to max 12 events for each channel. so that means about 180 code to match only for xy axis!

Greeting