取消
顯示結果 
搜尋替代 
您的意思是: 

MAX,GfSNI-DAQ configuration problem?

What's the problem for this error(See attachment)?
How can I configure a simulated device in MAX?Is someting wrong with my configuration in MAX(See attachment)?
 
下載全部
0 積分
1 條訊息(共 11 條)
5,510 檢視
Hello,
 
you are working with DAQmx. When you want to use it in DIAdem you have to create a Virtual Global Channel in MAX. This can be called from DIAdem, a DAQmx Task is in this case not working. This is for a simulated DAQmx Device and also for a real Device.
 
Hope this helps,
 
Rebecca Fox
Applications Engineer
National Instruments
0 積分
2 條訊息(共 11 條)
5,459 檢視
I creat Global Virtual Channels(See attachment),still get the error,what's wrong with this?
0 積分
3 條訊息(共 11 條)
5,443 檢視

When did you get this error? Which version of DIAdem are you using and which DAQmx?

Thanks,

Rebecca Fox
Applications Engineer
National Instruments
0 積分
4 條訊息(共 11 條)
5,418 檢視

MAX: ver 4.0.0.3010

Diadem:9.10.2260

 

0 積分
5 條訊息(共 11 條)
5,403 檢視
Sorry for late answering but I was ill.
In Diadem 9.1 it was necessary to choose the right driver. But this is only possible if you have installed an additional driver for DAQmx!
 
When you have installed it you can go into DAC module. There open the DAQ-Driver. In it you can chosse driver options and there you can change from Traditional DAQ to DAQmx.
 
Hope this helps,
Rebecca Fox
Applications Engineer
National Instruments
0 積分
6 條訊息(共 11 條)
5,332 檢視

Thanks,it works.

But this dialog(see attachment)'s language becomes German, can it possible be English?

0 積分
7 條訊息(共 11 條)
5,316 檢視
You´ve only written your MAX  verison, which DAQmx version are you using?
thanks,
Rebecca Fox
Applications Engineer
National Instruments
0 積分
8 條訊息(共 11 條)
5,312 檢視
I don't where to find the information about the version,I just download this:
and use it.
0 積分
9 條訊息(共 11 條)
5,306 檢視
Let´s start again. When you want to do DAQ with DIAdem 9.1 you need DAQmx and the additional DAQmx driver for DIAdem. The DAQmx version from your PC you can find in MAX under Software. There should be DAQmx, click on it and on the right sight you can see the version. Else, perhaps it´s easier to call NI. From which country are you?
 
Rebecca Fox
Applications Engineer
National Instruments
0 積分
10 條訊息(共 11 條)
5,303 檢視