Touchpanel numerical control bug

[parthabe]

http://forums.ni.com/ni/board/message?board.id=170&thread.id=331373

[jon_mcbee]

Here

Message Edited by jmcbee on 06-20-2008 03:12 PM

[TCPlomp]

See here

CAR: #117387

Ton

[DOC-doc]

Enormous labview bug :

VI is executable and compilable while it contains errors and broken wires...

This happens when a golbal is renamed.

http://forums.ni.com/ni/board/message?board.id=170&message.id=335226#M335226

[Ray.R]

http://forums.ni.com/ni/board/message?board.id=170&thread.id=332507

This was reported to R&D (# 118218) for further investigation.

[Ray.R]

When converting a project from LV8.2.1 to LV8.5, the run minimized setting in the build does not follow from LV8.2.1.

Resetting the build parameters in LV8.5 cures the issue.

See here http://forums.ni.com/ni/board/message?board.id=170&thread.id=336273

[altenbach]

In some parts of the world it is already July, so let's upgrade the bug thread to the July version.

This thread is now closed. No more June Bugs!

[parthabe]

---

altenbach wrote:

This thread is now closed. No more June Bugs!

---

Sorry, Altenbach!

There is only one more bug in June still left out, since I was on leave for 2 days...

It is this.

CAR ID 118302

[Stijn_Schacht]

When you input a number with a alfanumerical keyboard in a numerical control on a touchpanel which is running only ONE loop: it will be updated.

If you try to input that same number with an alfanumerical keyboard in a numerical control on a touchpanel which is running parallel loops, it will be ignored. However, using the up/down arrows to change or input a numerical control on a touchpanel running parallel loops, will update the control.

Very nasty bug when using touchpanels in operating systems: the operator has no id what hit hem, when he started his machine using default values, because the ones he entered with the keyboard, weren't updated...

there are no attachements, since everone can create one VI with two parallel loops and see what's going on for himself. You will need LV PDA + a touchpanel. I have tested this bug with LV8.5 and LV PDA 8.5 + TPC-2012 and TPC-2006T, I believe it is a general bug!!

There is no thread started yet, hopefully I have responds to this. If not, I will have to stop using touchpanels, since they are to dangerous to use.

[tst]

Start a separate thread in the LabVIEW board and include a link to that thread here. This is not the place for discussing bugs.

Also, do include an attachment with exact steps to reproduce. Creating that VI may be simple, but it's useful to have a single reference point, so that there are no miscommunications and misunderstandings.