Why Real Time Card OCI 7030/6030 not appears on DAQmx on MAX?

[SnowBoy111]

1)-

I have installed real time card PCI 7030/6030. When i opened MAX and went to Devices and interfaces it does not appears on DAQmx ,instead it appears on Traditional DAQ.

2)-

another thing is that When i used to open in LabVIEW 7,

on DaqAssistant  it does not appear to configure for AI channels.

if any idea please help

thankz

Haider +92 345 5 2828 70

[Stuart_G]

It doesn't show up because unfortunately that board is not supported in DAQmx.  It is only supported in Traditional DAQ.

StuartG

[SnowBoy111]

thanks

now it is not working with NI daqmx

but in future is it possible in its next versions?

Haider

[Stuart_G]

Unfortunately, we have no plans to support this board in DAQmx.  At this point if you want to use LabVIEW RT with DAQmx your best option is to either buy a PXI controller with an M Series board or to take a desktop machine and use it as an RT machine with a PCI DAQmx card.  If you have questions let me know.

StuartG

[Bassett_Hound]

Hi Haider,

You might also want to take a look at the 7041/6040E board as this is an equivalent RT/DAQ board that supports DAQmx.

Regards,

Steven B.