From Friday, January 17th 11 PM CDT (January 18th 5 AM UTC) through Saturday, January 18th 11:30 AM CDT (January 18th 5:30 PM UTC), ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Community Discussion Forums Most Active Hardware Boards PXI Topic

PXI

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

DMM Lock up and OS GPF when reading DMM

DMM Lock up and OS GPF when reading DMM

‎05-15-2001 11:22 AM

If the DMM is in 2-wire resis. mode and auto ranging is on and the leads are open the time out fails and the OS locks up. BAD BUG PXI bus
0 Kudos
Message 1 of 2
(5,238 Views)
Reply

Re: DMM Lock up and OS GPF when reading DMM

‎05-16-2001 08:19 AM

This sounds like an issue that was present in NI-DMM version 1.5. My suggestion would be to download NI-DMM 1.6 from our website and install this latest release of the software. Go here to download the software:

http://digital.ni.com/softlib.nsf/websearch/C76C4EA3931E0D0F86256A38006F02C9?OpenDocument

You should also be sure to uninstall the previous version of the driver through 'Add/Remove Programs' before installing the newer one.
If you are already using NI-DMM 1.6, or if installing this version does not correct your problem, you should contact the National Instruments Applications Engineering department to receive free technical support. To initiate this process, go to www.ni.com and click on 'Technical Support'. There will be a link on the subsequent page (on
the left hand side of the screen) for 'Request Support' which will allow you to beging the support process.
Message 2 of 2
(5,238 Views)
Reply