NIYANTRA 2013 : Online Learning Series
Attend this learning series to enhance your LabVIEW fundamentals and get assisted in completing your NIYANTRA 2013 project.
How to Attend: Click here to register for the series. Ince you register, you will receive an e-mail with a link. At the scheduled time & the date as shown in the agenda table below, simply click on the link and you will be able to join the online classroom. The recording of each session will be available here in case you cannot attend it.
While attending the online class, in case you are on a slow internet connection and cannot listen to us, we suggest you dial the toll free number 18004254061 and entter the pin as 779139# . You will not be charged for this and will start getting the webcast audio on your mobile/landline.
Click here to register for the online series
Agenda
Date | Session Details | Time |
20-Jun-13 | Introduction to Virtual Instrumentation LabVIEW and its versatility | 6 PM - 7:45 PM |
Navigating LabVIEW acquires, analyzes and presents data | ||
21-Jun-13 | Programming Code-“G “ | 6 PM - 7:45 PM |
Introduction to Engineering design Methodologies Session -I | ||
24-Jun-13 | Introduction to Engineering design Methodologies Session -II | 6 PM - 7:45 PM |
Introduction to Sensors & world of data acquisition Session -I | ||
25-Jun-13 | Introduction to Sensors & world of data acquisition Session -I | 6 PM - 7:45 PM |
Insight into Embedded system design & Application Development Session -I | ||
26-Jun-13 | Insight into Embedded system design & Application Development Session -II | 6 PM - 7:45 PM |
Simulation Circuit Design Using Multisim Session -I | ||
27-Jun-13 | Simulation Circuit Design Using Multisim Session -II | 6 PM - 7:45 PM |
Simulation Circuit Design Using Multisim Session -III | ||
28-Jun-13 | Control System Design Session -I | 6 PM - 7:45 PM |
Control System Design Session -II | ||
1-Jul-13 | Code Verification & Validation | 6 PM - 7:45 PM |
Embedded Hardware Design Testing & Sensor Integration | ||
2-Jul-13 | Embedded Hardware Design Testing & Sensor Integration with Co-Simulations using Multisim Session -I | 6 PM - 7:45 PM |
Embedded Hardware Design Testing & Sensor Integration with Co-Simulations using Multisim Session -II | ||
3-Jul-13 | Final Embedded Hardware & Software Implementation and validation | 6 PM - 7:45 PM |
Query & Feedback “ Do More With LabVIEW “ |
Also, register for the Webcast Wednesday series - a free weekly session on LabVIEW, every Wednesday. Click here.
Dear Sir,
We have end semester exams going on and two of our exams will be on the above mentioned dates for Labview. Will they be recorded so that we can see them after exam? Please let me know.
Thank you
Regards
dear sir, i am going though my university exams and the date of above mentioned event is going to collied with my exams date . so please will they be recorded so that i can see it after my exams.
thank you
regards
dear sir,
even i have my university exams going on and it ends only by june 3rd,so help us by viewing the content in latter days.
Thank you
Dear sir,
we are missing our sessions due to exams please do give the link or videos to get back the training sessions... i will keep track of it...
Thank you....
The recordings of these sessions will be hosted here. Please keep an eye on this space.
pruthviraj wrote:
Dear sir,
we are missing our sessions due to exams please do give the link or videos to get back the training sessions... i will keep track of it...
Thank you....
can we have offline lectures i am in jaipure .
Respected Sir,
Thank you for Webinars,it was a usefull session.Expecting more session on LabVieW.
Thank you
Regards
thanku.
we are also missing the sessions due to our university xams.
sir, our exams are held up to 15th july..can you extend the date of submission of project..?
Hello,
I request you to provide the link of the recorded sessions, so that I can see them in offline. Please reply me at your convenience.
Thanks,
Akula Pavan Kumar.
Sir, by what date the recordings of the above online lectures will be available? Or all of them will be made available after completion of entire series?
Dear Sir,
1) I couldn't watch the webminors for the last two days.The error shows "firewall program control problem" .Kindly help me in this regard.
2) May I know the link to watch the recorded webminors?
-Thanks,
Nandhini.V
please provide a link to watch the recorded webinars.
please provide the links soon.
sir please provide the link as soon as possible
This is to inform you that now you can watch the recorded videos of the online classrooms and also other tutorial videos by following the steps below.
Please note that the videos of every session will be uploaded on http://tinyurl.com/niyantra2013 . Make sure you keep visiting the page for updates and new videos.
Thanks a lot NIYANTRA Team...
Hi NIYANTRA team,
Thank you NIYANTRA team for helping us in all the possible ways. I am really grateful for the recorded session. thank you very much once again. Sir, I have one doubt will going through the recorded session will help us crack CLAD exam? or else do we have to study other materials. Kindly reply. Thanks in advance.
with regards,
Shankar.
Niyantra team,
I've missed most of my lessons due to my internship and I am not able to find the recorded videos of the same.
Could you help me with the same. Where can I find the videos?