Modular Data Acquisition
Distributed Measurement and Control
High-Performance Test
Automated Test System Development Software
Perspectives showcases how NI sees what’s next in the world of test and technology.
You can request repair, RMA, schedule calibration, or get technical support. A valid service agreement may be required.
Provides support for NI data acquisition and signal conditioning devices.
Provides support for Ethernet, GPIB, serial, USB, and other types of instruments.
Provides support for NI GPIB controllers and NI embedded controllers with GPIB ports.
03-20-2017 11:22 AM
I try to make 74HC123A model by myself using CD4538 model as a prototype.I have failed. There is my effort in 123 CHASSIS.zip file. Please Help!
Solved! Go to Solution.
03-22-2017 06:42 PM
Hello 74HC123A
What process are you following?
Diego H
National Instruments
03-23-2017 09:50 AM
It's simple, since both chips are the same functionality, I simply remapping the pins in the simbol pin name leaving the model node name intact.
03-24-2017 11:31 AM - last edited on 10-10-2025 12:10 PM by Content Cleaner
otvinta,
I suggest you try this step by step guide.
Creating a Custom Component in NI Multisim
https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YH5fCAG&l=en-US
04-03-2017 01:58 AM
That's exactly what I did first time, and check it out once more now, and I didn't find any mistakes.
05-10-2017 08:45 AM
Thank you all, I've found the right solution.
