(legacy?) NI PCI-6110 - instrument driver for Win10

[WWV]

Hi there,

PC w/ Labview measurement system running on LV2014/Win7 Pro OS environment has been wiped by colleagues due to blue screen crashes and reinstalled with Win10. Among others, NI BNC-2110 terminal block attached to NI PCI-6110 SCSI card seems to be addressable under NI Max (tested analog I/O with real signals).

However, the PCI card return bad install message in Windows device manager as well as the the LV program blocks using DAQ assistant return all 0 values. The PCI card(s) were installed with native NI drivers returned by Winupdate during OS Win10 install. Suspecting PCI Win driver culprit.

Should I use a Win downgrade PCI driver or... ?

So far, not able to find anything online. Anybody any idea?

Cheers

[ZYOng]

Did you install NI-DAQmx 19.1 or later?

According to NI Hardware and Software Operating System Compatibility, PCI-6110 is supported in Win10 with NI-DAQmx 19.1 or later.

[WWV]

Hi

I missed out on the instrument DAQ-OS compatibility chart. Thanks.

Actually, the LV program was written originally w/ LV2013, not 2014.

The NI LV version-DAQmx compatibility chart indicates as high as NI-DAQmx version 16.1 for LV2013.

I think that - unless we make a substantial upgrade of the LV version - I should revert to Win7 OS... 😞