Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

USB-6501 interface question

Solved!
Go to solution

When an I/O on the NI USB-6501 is configured as an input, is the 4.7k pull-up to the internal 5V present on the I/O or is the pull-up only there if configured as an open-drain output?

0 Kudos
Message 1 of 2
(1,953 Views)
Solution
Accepted by topic author Larry Strickland

That pull-up is in hardware... doesn't change when you reconfigure the port.  It's just inside the output terminals.

Message 2 of 2
(1,949 Views)