NIDaqmx Base (Linux) and LV8.0

[bef]

Hi,

I just ran into a problem while upgrading to LabVIEW 8.0 (Linux). USB devices are not supported in the linux-version on NIDAQmx8.0, so I still have to use the old NIDaqmx Base 1.5 drivers. Is that right?
I just can't get NIDaqmx Base 1.5 to work with LV8.0. LV7.1 works fine. Any suggestions?

Thanks,
bef

[AlanArmstead]

You are correct.  Currently, USB DAQ on Linux with LabVIEW 8.0 is not supported.  However, NI-DAQmx Base 2.0 for Linux will fill this gap.  Hopefully, it will be released in a matter of a few weeks.

-Alan A.

[AlanArmstead]

FYI:  NI-DAQmx Base Version 2.0 for Linux has released, and with it, USB data acquisition in LabVIEW 8.0 for Linux is now fully supported.  

-Alan A.

Message Edited by Alan [DE] on 05-24-2006 04:29 PM