NI 9025 push-in spring terminal

[AviramRo]

Hi

I have the NI-9025 C module with a push-in spring terminal and I am looking to replace the spring terminal with a screw terminal adapter like the Model: NI-9923.

Aviram

[TIDAD]

Hi Aviram, 

You want to replace connectors marked with red in the photo or it is not your device? 

Anyways, take a look also at this link:
https://www.ni.com/en-us/shop/accessories/products/terminal-block-plug.html

[Aviram]

Hi

This is the connector I would like to replace

[TIDAD]

Hi Aviram, 
According to NI webpage, NI9974 is 36 position female combicon screw terminal. This should replace the push-in spring terminal that you have. 

https://www.ni.com/en-us/shop/accessories/products/terminal-block-plug.html
before purchasing it contact NI support to ensure if there is no error on the webpage and it is indeed a screw terminal.

 The photo on the webpage corresponds to push-in terminal. 
Alternatively, if you have purchased your module recently, ask NI if it is impossible to replace one with D-SUB output. 

[M_Huang]

Hi,

Could you please tell me how to insert wires into this type connector?

It is the spring terminal block.  I insert screw driver into the inside hole to open the terminal, but I find it is not open---wire cannot be inserted into the outside (orange) hole.

Thanks

[santo_13]

Some more information,

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019Qk7SAE&l=en-US

Accessory compatibility guide - https://www.ni.com/en-us/support/documentation/supplemental/17/c-series-with-spring-terminal-front-c...

To buy - https://www.ni.com/en-us/shop/accessories/products/terminal-block-plug.html?skuId=112003

[santo_13]

Hi M_Huang,

Please refer this article on how to connect wires to spring terminal - https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YIcVCAW&l=en-US

[M_Huang]

Hi Santhosh,

It is really helpful for me.

Thanks a lot.

Mian