Installation of PCI6024E and AT-GPIB/TNT+. Measurement & Automation will only see the GPIB board!

[Prof Dave]

I am trying to install a PCI6024E and AT-GPIB/TNT+. The system will not recognize both boards. Individually, each board is recognized by Measurement & Automation. The drivers are version NI-DAQ 6.7 and NI488.2 1.60.

[NI support]

Dear Sir,

My suggestion is to upgrade NI-DAQ to version 6.9.2 available for free to download at:

http://digital.ni.com/softlib.nsf/display?ReadForm&lookup=NI-DAQ&view=current&node=132060_US

After unistalling the old version and installing the new one plug in both boards and look in the device manager for any conflicts (If you are using windows)

Thanks for contacting National Instruments!