Hello, I try to make program to used my usb-6009 with Labview 7.0 but the DAQ assistant don't find the usb-6009. I would make a program to acquire 2 min. data in 1 only graph,and make a switch to control output.Can you help me ?
the usb-6009 uses the daqmx base driver, not the daqmx driver. the daq assistant is a daqmx technology and that is why you cannot see the device using that.
Go to Start menu>>programs>>national instruments>>daqmx base and you will see example code etc. used for this. let me know if you have any other problems or queries.
