Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

Event Structure

Hi,
 
here you are talking about the 9VDC power supply source without earth and the output current  from my test fixuter, right?
Yes,  you have understood it right
 
measurement system as CB68LP and 6250 right?
 
Yes that's what i meant
 
 
 
 
0 Kudos
Message 51 of 63
(1,267 Views)
Hi,
 
here you are talking about the 9VDC power supply source without earth and the output current  from my test fixuter, right?
 
Yes,  you have understood it right
 
measurement system as CB68LP and 6250 right?
 
Yes that's what i meant
 
Plus I do not understand,  are you are saying that  have connected the 9V DC power supply's earth to GND on your test fixture, and in turn this GND is connected to the DGND of your 6250??
 
 
 
 
 
 
 
0 Kudos
Message 52 of 63
(1,298 Views)
Hi Dev:
 
Yes that's what i meant
 
Plus I do not understand,  are you are saying that  have connected the 9V DC power supply's earth to GND on your test fixture, and in turn this GND is connected to the DGND of your 6250??
 
I am sorry My 9V DC source is WITHOUT earth. I would like to say that  9V DC power supply's negative terminal  (GND) on my  test fixture, and in turn this GND is connected to the DGND of your 6250??
0 Kudos
Message 53 of 63
(1,296 Views)

Well John,

I guess we have to draw a line here.

This thread has indeed grown beyond all propotions.

From this information, i cannot commit and say for sure if this wiring is correct.

So, this is what i advise :

I advise you read the specs of Digital channels on your 6250's user manual and sit down with the specs of your fixture design and decide if this wiring id Ok

my intention is to say that as of now, this discussion has gone for too long with repeating of questions and answers.

and we have to finish it here.

All the best for your project

Regards

Dev

 

0 Kudos
Message 54 of 63
(1,293 Views)

Hi Dev:

Could you pleas help me out? Because I could not find anyone like you that do my similar project. Nowsaday it is very hard to get a job. Don't worry, I will take care of the small problem. Could I start another query and you answer again?

0 Kudos
Message 55 of 63
(1,292 Views)

Hi Dev:

I just get into the socity work. I don't know a lot about repeating questions and answers. Now, I got it. I hope you could give me one more chance to open another thread. I promise I will not repeat the questions and answers. I know you want the best wishes to finish the project, right? People needs luck, without your help, I don't think I can finish the project. Could you please give me one more chance.

0 Kudos
Message 56 of 63
(1,284 Views)

Hi Dev:

I just get into the socity work. I don't know a lot about repeating questions and answers. Now, I got it. I hope you could give me one more chance to open another thread. I promise I will not repeat the questions and answers. I know you want the best wishes to finish the project, right? People needs luck, without your help, I don't think I can finish the project. Could you please give me one more chance. Please

0 Kudos
Message 57 of 63
(1,284 Views)

Hi Dev:

I just get into the socity work. I don't know a lot about repeating questions and answers. Now, I got it. I hope you could give me one more chance to open another thread. I promise I will not repeat the questions and answers. I know you want the best wishes to finish the project, right? People needs luck, without your help, I don't think I can finish the project. Could you please give me one more chance. Please email me

0 Kudos
Message 58 of 63
(1,285 Views)
Trust me,
 
As of now, you do have enough of  material to finish your project successfully.
 
Just take one step at at time with confidence and you will do well. Do not get discouraged.
 
Take initiative and do enough of research on what you want to achieve.
Every material is easily availble on net, if you keep a cool head and search.
 
Keep forums as a guidance not a substitute for research.
 
All the best
 
Regards
 
Dev
 
 
 
 
 
 
0 Kudos
Message 59 of 63
(1,283 Views)
Trust me,
 
As of now, you do have enough of  material to finish your project successfully.
 
Just take one step at at time with confidence and you will do well. Do not get discouraged.
 
Take initiative and do enough of research on what you want to achieve.
Every material is easily availble on net, if you keep a cool head and search.
 
Keep forums as a guidance not a substitute for research.
 
All the best
 
Regards
 
Dev
0 Kudos
Message 60 of 63
(1,282 Views)