ni.com is currently undergoing scheduled maintenance.

Some services may be unavailable at this time. Please contact us for help or try again later.

Multifunction DAQ

cancel
Showing results for 
Search instead for 
Did you mean: 

DAQ damage

I have a computer with a DAQ 6025E installed. How do I check for damage in the DAQ 6025E card? How do I know that it is damage free? If damage, can it be repaired?
0 Kudos
Message 1 of 15
(4,580 Views)
Run the online diagnostic program at http://www.ni.com/support/selftest/
This test is thorough enough to give you a good indication of whether the board is working or not.

Joe
0 Kudos
Message 2 of 15
(4,568 Views)
Internet access from my workplace is difficult. I am not allowed to take the computer elsewhere. Can I run the DAQ test wiyhout usung the internet?
0 Kudos
Message 3 of 15
(4,545 Views)
Try this VI out.

Hope this helps!!
0 Kudos
Message 4 of 15
(4,519 Views)
My computer display has gone from 256 color to 16 color. I have sent for it repairs. Since it cannot go to 256 color my labview programs cannot run. The technician tells me that there is a virus. He might have to reformat. How can I reinstall my DAQ 6025E card. I am not able to find the necessarry CD.
0 Kudos
Message 5 of 15
(4,497 Views)
That device is still supported with National Instruments Traditional NI-DAQ driver. You can download the driver. The only bad thing is that the files are really big. I would recommend downloading it once and burning it to a disc for later.

Here is the URL where you can download the files.

http://digital.ni.com/softlib.nsf/websearch/BEC182021CEB566C86256EEE00696562?opendocument&node=132060_US
-scraggs99
0 Kudos
Message 6 of 15
(4,476 Views)
You can download any of our DAQ drivers from http://www.ni.com/support/daq/versions.htm.

I would also suggest using NI-DAQmx instead of Traditional NI-DAQ.

Regards,
Anuj D.
0 Kudos
Message 7 of 15
(4,466 Views)
Many VI are nissing from your code. For example callibration"e"series.vi is missing. Others are AOwaveform, AIwaveform.VI etc. How to test?
0 Kudos
Message 8 of 15
(4,446 Views)
The VIs used come with a DAQ driver. You may need to update your DAQ driver installation and ensure you do a full install.

Regards,
Anuj D.
0 Kudos
Message 9 of 15
(4,424 Views)
My DAQ 6025E card was installed in 2002 in labview 6.0. If I install labview 7.0, will that be show all the missing VI? Should I buy a NEW DAQ 6025E card? HOW?
0 Kudos
Message 10 of 15
(4,417 Views)