Can't connect to DAQ NI-9234 with carrier USB-9162 in Ubuntu 20.04

[Alfred.Shih]

I tried to connect NI9234 with USB9162 in Ubuntu 20.40 (kernel version: 5.15.0-73-generic).

I installed NI daqmx driver following https://www.ni.com/docs/en-US/bundle/ni-platform-on-linux-desktop/page/installing-ni-products-ubuntu... with NI-DAQmx 2023 Q2.

And also installed these packages:

ni-daqmx, ni-hwcfg-utility, ni-syscfg-runtime

The installation didn't show any errors.

But the led light didn't blink.

Run

nilsdev

It didn't show anything.

Run

lsusb

It can see

Bus 001 Device 002: ID 3923:719a National Instruments Corp. 

How to fix this issue?

Thanks!

[ZYOng]

USB-9162 has been replaced by cDAQ-9171. Most likely it is not supported in this Linux DT driver which was released only a few years ago.

[Alfred.Shih]

"Most likely it is not supported in this Linux DT driver which was released only a few years ago."
Where can I find this information?