suddenly last week i got error-70136 from Check/Wait move .flx. the programm has worked for over 3-months error-free. am using LV8.0, NI Motion 7.4 and the following Firmware versions/Update:
Firmware Version - 68331 7.31.3003 Firmware Version - DPS 7.20.3001 Firmware Version - FPGA1 7.10.3001 Firmware Version - FPGA2 6.00.2009
the error -70136 is a timeout error. You could try to increase the timeout value for the Check/Wait move .flx to avoid this error. Do you get this error permanently now? Otherwise it could be that you defined a timeout value that is reached very seldom, and that's why this error happened only now after 3 months. Which Motion Board do you use?
thanks for your reply. i've somehow tricked the flx to work and the tricking actually agree with what you are saying. i did it however differently. am using NI PCI 7350. the error was permanet till 2-days ago, before my trick:-) i hope it stabilises!!
thanks for your reply. i've somehow tricked the flx to work and the tricking actually agrees with what you are saying. i did it however differently. am using NI PCI 7350. the error was permanet till 2-days ago, before my trick:-) i hope it stabilises!!