回复： PCI-7344控制卡驱动程序新版本是多少啊

[ptmled]

When I transferred my PCI-7344 motion controller board to another PC, it is  recognized "PXI4200"in MAX. WindowsXP system put it as unknown PXI-4200 board. 

The PC runs on Windows XP、NI-Motion 6.1 （NIMotion7.7）and NI-DAQ 7.1 were installed. What could be the reason for the 7340 not being recognized?it is  recognized "PXI4200"??

Please hlpe me.Thanks.

[ptmled]

The PC runs on Windows XP.NI-Motion 6.1  were installed first,Then download NI-Motion7.7 is installed.

[ptmled]

But I transferred my PCI-7344 motion controller board and PCI-6527 I/O board at the same time  to this PC, The PCI-6527 I/O board  is recognized still PCI-6527 in MAX. Nevertheless the PCI-7344 is recognized"PXI-4200".

Why?

[ptmled]

Hi ptmled,

       If the card is incorrectly identified as an obsolete DAQ device, it sounds very likely that there is a problem with the NI-Motion drivers, or possibly the DAQmx or Traditional NI-DAQ drivers. I would recommend performing a repair of the drivers. For information on how to perform this process take a look at the knowledge base article on repairing National Instruments software. It is very likely that the reason this card is being misidentified is driver problem.

按照上面的方法修复、重装了全部软件，  重新启动电脑，MAX检测到的仍是PXI-4200.

另想一法：通过MAX--Tool--NI Product updates进行在线检测升级见下图

输入PCI-7344卡上的序列号D18431搜索驱动程序，结果没有。

现有的运动控制卡版本信息如图

请问该版本内是否有PCI-7344的驱动，是否太旧、兼容性怎样（WindowsXP）。有更新的驱动吗？请提供下载地址，上面怎么搜索不到？

[ptmled]

PCI-7344控制卡驱动程序新版本是多少啊?哪里能够下载?