Motion Control and Motor Drives

cancel
Showing results for 
Search instead for 
Did you mean: 

Slo-Syn Indexer Superior Warpdrive interface for LabVIEW

Hi,

 

I am trying to look for LabVIEW interface for Slo-Syn Indexer Superior Warpdrive but I was not able to find any concrete information. This hardware has its own motion controller programmable interface (MCPI) but I would prefer to use LabVIEW since I am more familiar with LabVIEW programming. Is there a way for this hardware to be interfaced with labVIEW? I have here the Operational Instruction of the Warpdrive for your reference. It already includes the commands that is used by the MCPI. If you already have an experience with this hardware, and can share some tips I would greatly appreciate it. This is gonna be my first major project and I would really appreciate any help you would give. Thanks so much! Let me know if you need furhter info.

 

Cheers!

Angel

0 Kudos
Message 1 of 9
(6,090 Views)

Hi there,

 

Haven't heard any reply yet. Anybody have an idea on this? Thanks!

0 Kudos
Message 2 of 9
(6,069 Views)

Anthing on this? I would really aprpeciate any response from you guys. Thanks!

0 Kudos
Message 3 of 9
(6,045 Views)

not even a response from ni AEs? 😞 thanks anyway.. 😞

0 Kudos
Message 4 of 9
(6,020 Views)

I've written software to communicate with a Slo-Syn Warpdrive SS2000D6i   If you want to to discuss it sometime drop me an email and I can give you an overview of what I did.

 

Donnie Curington

donnie.curington@stress.com

Message 5 of 9
(5,979 Views)

Hi Donnie,

 

Thanks so much for replying.. =D I emailed you separately in your email regarding the slo syn hardware. Looking forward to your repl! Thanks again so much!!!!

0 Kudos
Message 6 of 9
(5,935 Views)

Just following up.  I didn't receive an email.  Check and make sure there is only 1 r in the last name.

0 Kudos
Message 7 of 9
(5,880 Views)

Hi Donnie,

 

My apologies for the late reply. I was side tracked for a bit finishing another project. Anyway, I will email you again. Hope you get it. 😃 I will be sending the email now. Let me know if you received it. Thanks so much again!

0 Kudos
Message 8 of 9
(5,852 Views)

Hello,

 

I am also trying to connect a slo-syn motor to a LabVIEW program and would like to know anything which comes out of this.  Thank you

 

Nick

0 Kudos
Message 9 of 9
(5,695 Views)