iris

[Stresss]

Hi all,

I really very stress over this mini project that i have to complete in 3 weeks time. I'm pretty new to Labview and now i have to do a project on iris (pupil) recognition using Labview 8.0. Can anyone help in giving some information and any demo available for me to review and referrence? Really appreciate for any opinions and help.... Looking forward from any reply....as i really need help on this...Plzz..... plz... Pls help me....

Thank you so much!!!

Best Regards,

Stresss

[J.Harv]

Stress--

    So, that is really not very much information to go on.  I think anyone reading that would be able to offer more advice if you could provide more information.  What equipment do you have?  camera?  and how were you thinking about doing this?  It would be much easier to offer advice rather than try to tell you how to do the whole thing.  There are many ways to do this and each will depend many factors.  More information would be very helpful.  Thank you.

John H
Applications Engineer
National Instruments
http://www.ni.com/support

[Stresss]

Really thank you so much for the replies... really appreciate it.. and very sorry for the insufficient information...as i pretty new to Labview...  Actually, i don't intend to built the hardware... mean that i just will design the software part.... lik i store an iris image in the library,and load another 2 iris image which 1 of them is the same,and the other 1 is different... i just wan the system to differentiate whether is match or mismatch... Can labview do this function?? or i should use Matlab script to do the comparison?? If using matlab coding,i know there r many type of recognition method...so i quite confused on which to go... So does labview itself can perform the function??  On top of that,i find that IMAQ vision for labview can view image and handle image function...but why my labview version 8.0 dun have this function? Is this an extra function that i need to download? Do i need any external plug in for this? Can all this be done in 2 weeks time? According for ur experts opinion, is the time frame sufficient for this project?

[J.Harv]

Stress--

   It looks like you have a duplicate thread here: http://forums.ni.com/ni/board/message?board.id=140&message.id=19809 If so, please refer there for any questions or anwers.  If that is not you I apologize please post back and let me know.  Thank you.

John H
Applications Engineer
National Instruments
http://www.ni.com/support

[Stresss]

Hi John H,

Actually previously i post to the wrong forum, there's a person named Collin M ask me to post under Machine Vision. So i post again.. Sorry for any inconvinient cause. So where should i post to? Machine vision or Instrumentation Control? and do i need to remove 1 of them? Really sorry about that.

Best Regards,

Ting ting

[J.Harv]

Stress--

    I see what happened now.  It's really not a big deal.  The other forum is getting routed over to us in the machine vision group and Mark T has actually put up some good information on the other thread.  You can go ahead and use that one for now.  Thanks.

-John H