Hello,
I'm trying to control JAI
CV-A10 CL camera using IMAQ Set Camera Attribute.vi with cameralink
PCI-1426.
I can snap the picture and I
have been able to change the "Shutter speed" (when "Shutter Mode" is "Normal") and changes can be seen in the
image snapped.
But
when I'm trying to change the "Gain Level" nothing happends while
Labview is running continously. I've also tried to use the
"Programmable Exposure" (when "Shutter Mode" is "Programmable
Exposure") with correct attributes (0-625). Programmable Exposure
doesn't work either.
There is no difference between the new and the previous image. I have checked
the settings by using IMAQ Get Camera Attribute.vi and the attributes were
updated. I have used the attributes presented in the Camera/Info .icd
file.
Attributes, which contains
integers seems to be the biggest problem.
What should I do? I also
attached .vi files in SetCamAttributes.zip:
In HL SnapKV mikko3.vi you
can set the Programmable Exposure in integers (0 - 625).
In HL SnapKV mikko2.vi you
can set the Gain Level in desibels ( -3 - 12)dB.
In HL SnapKV mikko.vi you
can set the Gain Level in string (-50 - 150).
Thank you for helping
me!
Regards Mikko
Linnaluoma
>Software
Details:
>LabVIEW version
7.0
>NI Hardware
:
>Image Acquisition (IMAQ)
device PCI-1426
>Driver Version
:
>NI-IMAQ
3.5.1
>Operating
System:
>Windows
XP
