Grabbed Image shown incorrect

[overseer]

Hi

I'm grabbing images with an CCD-Camera (single or continuous), but the image that is shown looks like it is 'duplicated' a few times and it moves horizontaly. I assume that the caturing sequence works fine (aquisition of images to buffer).

Taken images should be 8bit bitmaps.

I attached a screenshot of a simplified version of the labview 7.1 code and the images taken with labview and the original camera software


I hope you could help me

Overseer

[BruceAmmons]

It looks like either the acquisition or image conversion is configured wrong.

If you were using an NI board, I might have some helpful suggestions, but I don't know anything about the board you are using.

I can only suggest that you double check all your inputs and outputs.

Bruce

[overseer]

Hi Bruce

I'm not using an NI Board.

I use a CCD Cam called "BCi4-6600", which has a *.dll to acces the device.

I already triple (and quad) checked nearly everything and i'm still getting the wrong image.

I think that i'll have to write a c++ programm to check, if the dll works correctly...