Changing Camera attribute From Front Panel

[JN_23]

Dear Team,

I am using Basler GigE camera with VBAI. In my application I have to change the Exposure Value from front panel.

Please suggest me the way to do that. I already went through some discussion here and found it is for Smart camera where there is a tab "Advanced" under which this option is available.

But I could not find this option in my case.

Thanks

[Brad · Accepted solution]

For GigE cameras, use the Read/Write Camera Attribute step. Since the exposure time can be set without stopping the acquisition, you can use the "Don't stop acquisition" mode and associate the attribute with a previous result to change the value.

Hope this helps,

Brad

[JN_23]

Thanks Brad.

It worked for me.