Machine Vision

cancel
Showing results for 
Search instead for 
Did you mean: 

Basler Spl4096-140k and NI PCIe 1429

Hi,

i use NI PICIe 1429 frame grabber to acquire image by Linescan Basler SpL4096 camera under LabWindows/CVI.

 

The interface, session and grab function work well in free-run mode.

 

I need to acquire line synchronized with external trigger generated via PCI 6731 and passed to frame grabber via RTSI bus.

 

I have checked that the trigger signal is correctly on the RTSI bus on the frame grabber.

 

I configure the External trigger with the imgSessionTriggerConfigure2 or imgSessionLineTrigSource2, but i have always a timeout on the grab or snap function when try to acquire, because the camera/framegrabber don't see the trigger signal.

 

Anyone can help me with trick?

 

Thank you

 

Mikkuz

0 Kudos
Message 1 of 3
(2,687 Views)

Hi Mikkuz,

 

have you checked this KB:

 

IMAQ Boards that Support Routing to the Camera Control (CC) Lines

http://digital.ni.com/public.nsf/allkb/49A701F932DA43818625716A001B4D1B?OpenDocument

 

Thanks,

Giuseppe.

 

0 Kudos
Message 2 of 3
(2,671 Views)

Dear Giuseppe,

 

Thank you for the document, I've never seen.


Yesterday afternoon I had already solved, playing in MAX, sifting through all the tabs I had noticed this configuration possible.

 

I tried and it worked.

thanks

Mimmo

0 Kudos
Message 3 of 3
(2,667 Views)