waveform daq assistant - Two signals appear the same

[Laura F.]

Hello Michael,

I think that this module always scans the lower number channel first, and if you have asked for the channels in a different order, the driver reorders them in software.  Therefore, it seems like your signal always mirrors the lowest channel physically scanned.  I think it is probably a good idea to look into sending your SCXI-1100 in for repair. To do so, you need to speak to a technical support engineer, which you can do at ni.com/contact.    

Let me know if you have other questions.

Regards,

Laura

[mrad]

Laura,

Problem solved!  I talked with a guy from NI application support.  After right-clicking on my SCXI chasis in MAX and selecting properties -->chasis tab, the "communicating SCXI  module slot" was incorrectly left at the default slot 1, instead of slot 2 which is the location of my data cable.  After changing this selection, my application worked perfectly.

Thanks for the time you've dedicated to helping me, Michael

[Laura F.]

Michael,

Thanks for the update - I am glad everything is working as expected now!

Regards,

Laura