06-14-2012 05:35 AM
Hallo to everybody !!! it's only a month that I'm using the NI USRP 2920.
I have a question please
I want to Know minimum detectable signal for the two port TX1/RX1 and RX2.
thank you
Francesco
Solved! Go to Solution.
06-15-2012 05:08 AM
Hi Francesco,
you can check these information on USRP data sheet:
http://sine.ni.com/ds/app/doc/p/id/ds-355/lang/en
In particular the minimum detectable signal depends on frequency.
Giuseppe.
06-15-2012 05:32 AM
thank you Giuseppe
are you italian?
06-15-2012 05:34 AM
Yes
06-16-2012 07:27 AM
allora approfitto e scrivo in italiano...
sto cercando di progettare un sistema SDRadar utilizzando la USRP 2920 ..
spero di riuscire a superare i limiti legati all'interfaccia USB della USRP di prima generazione della ETTUS.
ho guardato il datasheet( http://sine.ni.com/ds/app/doc/p/id/ds-355/lang/en ) e alla voce receiver trovo :
Max Input Power (Pin) 0dBm
posso fidarami di questo parametro ?non mi sembra legato alla sensibilità del ricevitore (mi aspettavo un "Min imput power")
Saluti Francesco
07-09-2012 03:03 AM
Hi giuseppe I measure the sensibility of the USRP ..
it's around <-130 dB
by
10-23-2012 02:44 PM
Hello All,
I want to calcalute the noise floor of the USRP2. Any help in this regard will be greatly aprreciated .
Regards