tutorial to build CGI application

[Phil_W]

I have to put in place a distance learning remote laboratory at
university. At the moment we are using Labview 6.1 with th internet
toolkit.
I understand the standard examples provided with the add-on.
I would like to find a step by step tutorial to build a sample CGI
application with or without paramters pass through the URL.

Thanks for your help,
Regards,
Philippe

[Jyoti F]

Hello Philippe,

Here is a link to the CGI tutorial we currently have on our website: http://zone.ni.com/devzone/conceptd.nsf/webmain/E8A8D4B9497A1E1E86256802007B8E06?opendocument. It is not step by step, but I think it will help you.

Also, if you need help with building your application into an executable, please look at the following knowledge base: http://digital.ni.com/public.nsf/websearch/17427B623FE6083F86256D1300705CFE?OpenDocument

I hope this helps.
Regards,
Jyoti F.
National Instruments

Also, if you need help with

[Phil_W]

Thanks for your help Jyoto !
I am going to take look ..

Philippe