transpose 1d array

[Akatsuki]

It sounds kind of dumb, btu when Iave the 1d array or 1d string, it saves it as a row instead of column.  I know how to do that for a 2d array since they have that transpose 2d.  But how do you do for a 2d string or 1d string? thank you very much.

[altenbach]

If you use "write to spreadsheet file", wire a TRUE diagram constant to the "transpose?" input.

If you do your own formatting, use a newline ("\n" in '\'-code display) as delimiter.

Message Edited by altenbach on 11-04-2005 02:36 PM

[Akatsuki]

I use "write file"

Here i attached the VI, it is really messy, but you can see on the last case my labview code.

Message Edited by Akatsuki on 11-04-2005 04:39 PM

[altenbach]

As I added in my answer above, you just need to use a different delimiter to sepearate your elements (newline in this case).

[Akatsuki]

is there a tutorial on how to use these codes that you are talking about? I tried to put \n but it does not go to the line.

[altenbach]

You need to set the string indicator or diagram constant to show '\'-codes. Right-click to modify.

[Akatsuki]

Is it possible to get an example of it? Thank you.

[altenbach]

Well, until you posted your VI, I did not know how you were formatting your strings. THere are many possibilities. 🙂

I cannot make sense out of your VI, but maybe all you need is to append a linefeed to each string array element. This can be achieved by placing a FOR loop as shown in the attached modification of your VI.

See if it works.