traditional ni daq using tbx 68t with error 10685

[Notay]

Hi im new, I have tried to create a program that will allow me to accept temp readings. i have a tbx 68t device and a pci 4351 card from which this is read.

I have uploaded the vi.

i keep getting a message of 10685 - the clock rate exceeds the boards recommended max. rate, even when i have the clock rate to a low 10.

any help is much appreciated, i am fairly new to daq with labview. i do appolgise i have yet not annotated on the program.

Thanks

Notay

[JonBowers]

Hi again Notay,

The 4351 Device has specific rates that you can sample at for single or multi-channel acquisition. There are six possible reading
rates – 10, 50, and 60 readings/s in single-channel acquisition mode and 2.8, 8.8, and 9.7 total readings/s in multiple-channel acquisition mode.

See the data sheet or manual linked bellow for more information.

http://www.ni.com/pdf/products/us/2mhw296-297e.pdf

http://digital.ni.com/manuals.nsf/websearch/9249394DFC45FA3D86256FD20078D836

Jon B
Applications Engineer
NI Uk & Ireland

[Notay]

cheers mate!

Notay