graph between cursors

[kamwoj1918]

Hi, 

I have a problem with cursors.

I have a waveform graph with some signal and two cursors. (annex 1)

I would like to see a signal which is between the two cursors on the second waveform graph.

Thank you for your help

[GerdW]

Hi kamwoj,

read the cursor position with the help of a property node and then use ArraySubset to get the interesting part of the signal...

[kamwoj1918]

Okey, when I use property node with cursor position and array subset waveform graph show me signal from only one cursor.

What about second cursor ?

kamwoj1918

[Dennis_Knutson]

What about it? If you aren't using the second cursor to determine the array length, then you have not written the program correctly.

[kamwoj1918]

I meant, if in "Cursor Position:Cursor X" there are many position cursors or only one position cursor ?

[GerdW]

Hi kamwoj,

you have to use the property "Active Cursor" to select the cursor you want to read it's position...

[Dennis_Knutson]

You first write to the Active Cursor property to select the specific cursor (i.e. 0 or 1) and then read it's value.

[kamwoj1918]

So, If I would like to use two cursors ? 🙂

[Dennis_Knutson]

[James_AC · Accepted solution]

Hi,

Does the attached help?

Don't forget to turn off "Autoscale X" for the 2nd graph and you may want have a seperate 'condition' if cursor 2 is at a lower value than cursor 1.