03-02-2012 08:43 PM
hello...i'm izuan..
i want to design function generator two channel but i don't have any idea to built channel...
can u help me..
this is my bloc
03-04-2012 08:07 PM
There is the Getting Started with NI-DAQmx and the basic LabVIEW tutorial. After that, look at the DAQmx examples that come with LabVIEW. You might also want to learn how to better phrase your question. Explain your problem with a few more details.
03-05-2012 07:14 AM
I'm design function generator 2 channel but I have problem to connect wire at sampling clock..
Any idea or solution..i need ur help...tq
03-05-2012 09:26 AM
I don't understand why you are trying to connect it to anything. If you really want to, then make your SampClk.Rate an indicator.
03-06-2012 02:48 PM
ok,thank you so much...
03-07-2012 02:58 AM
hye,can u help me..
i test my function generator but have error..i don't to solve this error..
03-07-2012 03:05 AM
i would search this website for 200524 error code, there is normally good advice on how to solve the error. I searched the discussion forums and found this solution:
http://forums.ni.com/t5/Multifunction-DAQ/Error-200524-in-DAQ-6216/m-p/1703368
hope it helps
03-07-2012 03:15 AM
thank you so much for your information
03-07-2012 03:21 AM
No problem