failure at load.cpp in line 4081

[paul_s]

Hi Randy - any resolution for above error yet?

regards, Paul.S

[JRA]

Do you have any more information about this error? I've heard of this error once before, but the issue was never resolved. It was suspected that the VI had become corrupted because the problem could not be reproduced. If you are able to reproduce it, please let us know how and we can work on a solution.

[Randy_H]

Paul,

I am afraid I have lost the context of this request. Was this an e-mail or a Discussion Forum post? Could you point me to it or supply the service request neumber. I am still trying to catch up after being out of the office for a week.

Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

[paul_s]

Hi Randy - sorry not to be more specific. Couldn't find the original message on NI but found your answer originally on google - link is:

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&threadm=506500000008000000E64E0000-1023576873000%40exchange.ni.com&rnum=2&prev=/groups%3Fq%3Dload.cpp%2Bgroup:comp.lang.*%26hl%3Den%26lr%3D%26ie%3DUTF-8%26selm%3D506500000008000000E64E0000-1023576873000%2540exchange.ni.com%26rnum%3D2

it seems to be a problem a few people have had, and your response was:

We have had a few other reports of this issue. Our R&D department is
looking into this issue, but no time frame is available for a solution
at this time.

Randy Hoskin
Applications Engineer
National Instruments

thanks again, Paul.S

[Randy_H]

Paul,

Thanks for the link, it got me in the right direction. Right now, there has been no change in R&D's progress in this matter. They think it might be corrupt tab controls, but have been unable to find a cause for the issue. I will research this a little more and see what I can come up with.

Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask