Zebra printer - Printing from LabVIEW using ZPL commands....

[MengHuiHanTang]

Mark,

Is this still going to happen?

[Mark_Yedinak]

I need to see where our legal team is at with this.

[Denker]

Mark,

Do you have Zebra ZM400 VID and PID numbers?

[Mark_Yedinak]

---

@Denker wrote:

Mark,

Do you have Zebra ZM400 VID and PID numbers?

---

Here they are:

USB\VID_0A5F&PID_0066.DeviceDesc="ZTC ZM400 300dpi-ZPL"
USB\VID_0A5F&PID_0067.DeviceDesc="ZTC ZM400 200dpi-EPL"
USB\VID_0A5F&PID_0068.DeviceDesc="ZTC ZM600 200dpi-ZPL"
USB\VID_0A5F&PID_0069.DeviceDesc="ZTC ZM600 300dpi-ZPL"
USB\VID_0A5F&PID_006A.DeviceDesc="ZTC ZM600 200dpi-EPL"
USB\VID_0A5F&PID_006B.DeviceDesc="ZTC ZM400 600dpi-ZPL"

[Denker]

Thanks, lord of the printers 

Any news about your LabVIEW USB driver? 

[Mark_Yedinak]

---

@Denker wrote:

Thanks, lord of the printers 

Any news about your LabVIEW USB driver? 

---

I'm waiting for a response back from our legal department. It looks like I will be able to release it to the public but I need the EULA from legal before I can do anything with it.

[MengHuiHanTang]

Hi, Mark,

When you release the driver, you will do it here in the NI forums, or another site?

[Mark_Yedinak]

We haven't made a final decision yet. I will be submitting it to th etools network. I will most likely post a copy here once I get the OK from legal. We may also post it on Zebra's site.

[JamalHashim]

Hi dg_lbe

Need your favor to convert your file to labview ver8.2. I really need it.

Thank You

[Dennis_Knutson]

Use the version conversion board you see linked at the top of the page. There's even an on-line tool you can try.