Xilinx Compilation Tool for LabVIEW 2016 (32-bit)

[umang885]

I do not have the xilinx compilation tool installed with labview fpga. I have tried searching the NI website to find a suitable version for the compilation tool but haven't been able to.

I am using NI cRIO - 9014, can anybody tell a suitable version of xilinx compilation tool that is compatible with my cRIO?

Below is the image of the error I was getting while deploying

[umang885]

I do not have the xilinx compilation tool installed with labview fpga. I have tried searching the NI website to find a suitable version for the compilation tool but haven't been able to.

I am using NI cRIO - 9014, can anybody tell a suitable version of xilinx compilation tool that is compatible with my cRIO?

Below is the image of the error I was getting while deploying

[Terry_ALE]

This is a Real-Time controller and does not have an FPGA.  The FPGA is in the reconfigurable embedded chassis.

On https://www.ni.com/docs/en-US/bundle/crio-9012-9014-user-manual/resource/crio-9012-9014-user-manual.... see page 5 item 4.  Which part do you have for that?

Once you have that part, check here:

https://www.ni.com/en/support/documentation/compatibility/19/compatibility-between-xilinx-compilatio...

[umang885 · Accepted solution]

I have four different modules installed on my chassis that are based on fpga. I wouldn't have been able to design a VI that includes fpga i/o modules and then got the error that states compilation tool is not installed.

Anyways, I found out that the problem was that LabVIEW FPGA module is not compatible with windows 10 and that's why Xilinx Compilation tool was not installed on my system. So, I have to use their cloud compiler service in order to run my code.

[Terry_ALE]

Great to hear. There should be an additional item which actually contains the FPGA.

Cloud compile is definitely a good option. I use this when I do not have the Xilinx tools installed for a particular FPGA.