Triangular voltage pulse

[efamssa]

Hi,

I'm new to Labview, and I have been struggling to get it to work. I was wondering if someone could help me in getting the pulse of the attached graph. 

I'm using a Keithley Source Meter model 2400-C and an USB/GPIB Interface 82357B from Agilent technologies. 

I just want to apply the voltage for sometime and then turn it off.

Any help will be highly appreciated! 

[danil33]

Hi efa,

            For getting a pulse as you attached,it's simple.See the attachment.But...

---

Just simply apply a voltage for sometime, then turn off, then apply voltage again, and repeat

---

You have to explain more clearly about your requirement.

[danil33]

---

I'm using a Keithley Source Meter model 2400-C and an USB/GPIB Interface 82357B from Agilent technologies.

---

Sorry I just now saw your edited message...

[efamssa]

Thanks for the attachment. I meant that I want to apply that pulse for some time, let's say 1 min and that's it.

[danil33]

Hi efa,

            You can achieve it using a loop.