From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-06-2018 07:42 AM
Hello, we want to represent the characteristic curve of a npn transistor.
When making the diagram, the graph does not represent what it should, it gives us the following error:
04-06-2018 07:55 AM
Hello Jose,
A XY Graph takes a cluster of two arrays (one for X, one for Y) as input. Here you input a cluster of two single values. More info here : https://flylib.com/books/en/3.352.1.111/1/
To solve your problem you could move your bundle function and graph outside the nested For Loop, thus creating an indexed array for both your values. Yet, you would see only the last 5 values.
Does it help ?
04-06-2018 09:56 AM
Just change that Build CLUSTER to a Build ARRAY.
04-06-2018 10:03 AM - edited 04-06-2018 10:03 AM
As far as I know, inputting a single array to an XY Graph will not work. Do you have an example Minions ?
04-06-2018 10:08 AM
My bad there, I meant to add the Build array to the Build cluster output. This will only display a single element for each loop. If you move the XY Chart outside of the inner loop, then it will display the 5 elements every time the outer loop increments.
04-06-2018 10:10 AM
All good, was just wondering 🙂