TiScan Issue

[itspop]

I'm using a TinScan to view 16 Thermocouple channels (0-15) using a PCI-773 and labview 7.  When viewing my front panel I want to set the low channel to TC# 1 and read channel 0 from the board and make adjustments from the high channel up to TC#16 which is channel 15 on the board. I don't want an operator getting confused thinking there reading channel 1 and its actually channel 2 due to the offset by 1.I tired adding various functions to my block diagram but have been unsuccessful.

I attached a copy of my progress

Thanks for all your help.

Itspop

[Dennis_Knutson]

The only function you need is this one. Use one each between the terminal and the input to the subVI. You should really think about taking a class on LabVIEW. Look at the recomendations tst has made here.

Message Edited by Dennis Knutson on 01-25-2007 12:31 PM

Message Edited by Dennis Knutson on 01-25-2007 12:32 PM

[itspop]

Thank you for your input, I resolved my problem.

Lin