LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Strange scrollbar behavior

Solved!
Go to solution

Hi,

while programming an application I clicked somewhere on the horizontal scrollbar and then the scrollbar was in the middle of the frontpanel.

I have no idea how this happens

Never seen this before!!?!

 

Anyone has idea how to change this back to normal?

 

 

regards timo

---
0 Kudos
Message 1 of 3
(1,520 Views)
Never seen before funny :),Good luck
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better

Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
0 Kudos
Message 2 of 3
(1,516 Views)
Solution
Accepted by topic author TimoSchott

Hi Timo,

 

Good afternoon and I hope your well today.

 

I am a little unsure what your issue is exactly, but maybe the following will help.

 

There are two methods to creating a Horizontal scrollbar, 

1) Right-click the scrollbar and select Horizontal Scrollbar >> Always On

2) On the front panel go to Modern>>Containers>>Horizontal Splitter Bar.

 

I imagine you did number 1.

 

Now to remove it you have to methods,

1) Right-click the right hand scroll bar (as before) and select >>Always Off.

2) Right-click the created horizontal scrollbar and select Remove with adjoining splitters.

 

If you cant move the scrollbar to where you want, I would make sure the scrollbar isn't locked. You can check this by selecting the scrollbar, right click and  uncheck Locked.

 

To achieve the results you have, I firstly created a horizontal splitter. The by selecting the  Right hand side scrollbar in the top pane select Horizontal bar >> Always On. 

 

I hope this helps, 

Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help! 😉
Message 3 of 3
(1,485 Views)