ni.com is currently undergoing scheduled maintenance.

Some services may be unavailable at this time. Please contact us for help or try again later.

LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Strange scrollbar behavior

Solved!
Go to solution

Hi,

while programming an application I clicked somewhere on the horizontal scrollbar and then the scrollbar was in the middle of the frontpanel.

I have no idea how this happens

Never seen this before!!?!

 

Anyone has idea how to change this back to normal?

 

 

regards timo

---
0 Kudos
Message 1 of 3
(3,559 Views)
Never seen before funny :),Good luck
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better

Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
0 Kudos
Message 2 of 3
(3,555 Views)
Solution
Accepted by topic author TimoSchott

Hi Timo,

 

Good afternoon and I hope your well today.

 

I am a little unsure what your issue is exactly, but maybe the following will help.

 

There are two methods to creating a Horizontal scrollbar, 

1) Right-click the scrollbar and select Horizontal Scrollbar >> Always On

2) On the front panel go to Modern>>Containers>>Horizontal Splitter Bar.

 

I imagine you did number 1.

 

Now to remove it you have to methods,

1) Right-click the right hand scroll bar (as before) and select >>Always Off.

2) Right-click the created horizontal scrollbar and select Remove with adjoining splitters.

 

If you cant move the scrollbar to where you want, I would make sure the scrollbar isn't locked. You can check this by selecting the scrollbar, right click and  uncheck Locked.

 

To achieve the results you have, I firstly created a horizontal splitter. The by selecting the  Right hand side scrollbar in the top pane select Horizontal bar >> Always On. 

 

I hope this helps, 

Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help! 😉
Message 3 of 3
(3,524 Views)