Starting DAQ assistant earlier than main program

[Thibault_Prevost]

Hi,

I would need to start acquiring data via the DAQ assistant module 100ms before my main program in the while loop starts (see pic attached). How could I simply achieve that (without having to include the DAQ assistant in the while loop itself)?

Thanks for your help,

Thibault.

[RavensFan · Accepted solution]

Put a flat sequence frame between the DAQ mx start and the while loop.  Wire the error wires through it.  Put a 100ms Wait function in the frame.

[DianeS]

Or use the "time delay" express VI, which has error wires, and set the delay to 100msec...

(choose "view as icon" to make your block diagram a bit nicer to look at)

🙂

[Thibault_Prevost]

The flat sequence thing works beautifully: thanks!

Thibault

[Dennis_Knutson]

Then mark Raven's answer as the solution - not your thank you.

Click on 'Options' to change the marked solution.

[Thibault_Prevost]

Oops... yes... sorry!

T